WHEELCHAIR AND SEATING SYSTEMS

Our segmented gel bladder contains an aqueous, highly viscous gel. The bladder is surrounded by a high density foam shell that is covered using a fluid-proof, low shear nylon top with a medical grade vinyl bottom. All cover materials and foam are fire-retardant and anti-microbial.

This versatile gel cushion utilizes the same gel formulation and bladder design as used in the Commander® Gel Cushion. The low shear nylon cover is anti-microbial and fluid-proof to protect the inner core. An excellent choice where a low profile cushion is necessary

This versatile gel cushion utilizes the same gel formulation and bladder design as used in the Commander® Gel Cushion. The low shear nylon cover is anti-microbial and fluid-proof to protect the inner core.

The coccyx cutout redistributes pressure at the sacral area while offering patient comfort and even distribution of weight throughout the cushion. Medium density fire-
retardant foam is covered in either a poly/cotton, in your choice of black, navy, or gray medical grade vinyl. An optional solid seat insert is available.

Designed to provide comfort and basic protection for the wheelchair bound patient. Ideal for institutional use. This cushion is available with a poly/cotton cover or incontinent medical grade vinyl cover. A medium density fire-retardant foam is used for this cushion. An optional solid seat insert is available.

Viscotec™ foam conforms to the patient’s body by
surrounding bony prominences, reducing interface
pressures. This heat activated foam self-adjusts to the seating surface to maximize comfort and pressure
redistribution. Viscotec™ foam is covered using either a 4-way stretch-knit or Vyvex III® low shear,
fluid-proof material. Vyvex III® and foam are
fire-retardant and anti-microbial. Navy stretch-knit
cover is shipped unless otherwise specified.

Crown Bariatric cushions offer maximum protection to guard against the incidence of pressure sores for patients weighing up to 1000 lbs. allowing for proper immersion and envelopment around the bony prominences as well as providing for pressure redistribution. Customized for patient weight. Vyvex III® stretch knit top cover with a non-skid bottom cover.A medium density VPF® foam top and a high density VPF®foam base.

The Commander Perfect Position DLX® Cushion provides the most advanced pressure redistribution, therapeutic support and positioning available. The Commander Perfect
Position DLX® Cushion allows therapists to offer correct posture, proper spinal alignment, trunk stability and all the pressure redistribution characteristics required for a seating application through proper immersion and envelopment of the bony prominences. The Vyvex III® top cover is a low shear, 4-way stretch urethane which is fluid and stain proof. The bottom cover is a non skid tri-laminate vinyl. Available in low profile design.

Provides the proper positioning for patients who hyper-extend by thrusting forward. Cushion base and top portion are a high density Medflex® VPF® foam and are offered with a pressure redistribution foam top. Gel can be added for additional pressure redistribution. Zippered cover is a medical grade vinyl, non-skid bottom with safety strap. Optional Vyvex-III stretch-knit cover.

Provides the proper positioning for patients who hyper-extend by thrusting forward. Cushion base and top portion are a high density Medflex® VPF® foam and are offered with a pressure redistribution foam top. Gel can be added for additional pressure redistribution. Zippered cover is a medical grade vinyl, non-skid bottom with safety strap. Optional Vyvex-III stretch-knit cover.

Internal rotation of the hips are reduced as well as a positive midline sitting position is achieved with this cushion. The “Level-R” reduces the hammock effect usually found with a wheelchair sling seat. Available in a wedge design to reduce patients from sliding out of the wheelchair. The Med-Flex® VPF® foam core is covered in a fire retardant, anti-microbial black vinyl cover. Safety straps are optional. All cover materials meet California Technical Bulletin #117 for fire retardancy. Available in 2” to 1” and 3” to 2”. Optional Vyvex III® cover. Supports 250 lbs.

Wedge cushions significantly reduce the patient’s ability to hyper-extend out of the wheelchair. The cushion is a high density foam that increases the seat to back angle, just enough to maintain proper sitting posture. This cushion is available with optional gel for pressure redistribution and immersion. The standard cover is a black vinyl. Also available in black Vyvex®-III stretch top with non-skid bottom with safety straps. All cover materials are anti-microbial and meet California Technical Bulletin #117 for fire retardancy. Med-Flex® VPF® super high density foam core available in 3” - 1.5” & 4” - 1.5” taper. Supports 250 lbs.

Perfect for wheelchairs, recliners and most chairs needing extracomfort & cushioning. Conforms to the individual's shape reducing the incidence of pressure ulcers. Cushion is filled with soft, hypo-allergenic, high-lofted polyester fiberfill. Vyvex-I® cover is a low shear, fluid proof nylon cover, includes safety ties. Machine washable. One size fits narrow and adult size wheelchairs.

Solid seats and backs are used to properly align the body as well as to eliminate the sagging effect found in standard sling seat wheelchair upholstery. Safety straps secure the solid back to the wheelchair. The cushion uses
medium density foam and is covered using waterproof black leatherette cover.

This versatile foam cushion is covered in a black
leatherette that is anti-microbial and fluid-proof to
protect the Med-Flex® VPF® foam inner core. Optional Vyvex III® 4-way stretch-knit cover. Wooden solid seat insert base and core is 1.75”. Left or right 6” stump extension. Safety strap secures insert to the wheelchair. Supports 250 lbs. Optional gel bladder.

Your patients are secure with Safe-T Seat®. Proper positioning is maintained by our defined perimeter cutout. Accidental slippage from patients who tend to slump or hyperextend from the chair are greatly reduced. The inner core is fire-retardent Cal. Tech #117 high compression polyurethane foam that is covered with an expanded vinyl. Available in Navy Blue or Black. Fits Narrow and Adult size wheelchairs. Can be ordered in 2” thickness.

Safety is a must for all patients sitting in a wheelchair. We offer three styles of belts that are easy to attach to any standard wheelchair frame.

Auto Push Button: This buckle style offers a spring loaded “pop-out” connector. The center release mechanism separates with minimum effort.

Side Release: This injection molded Delrin “side release” buckle provides excellent durability with light weight structure. Just squeeze the sides for quick release.

Hook and Closure: The remarkable sheer strength of hook and loop closure plus its “Clinch” features makes this seat belt one of our best. It is easy to use, lightweight and boasts a simple on and off quality.